| Amateur Radio linear amplifiers and transceivers. ACOM, PowerGenius 4O3A, OM Power, ICOM, SunSDR, HEIL and more. Top brands, best prices. YES we ship worldwide!
Export stock list, prices in USD
|
| Model | Description | Price AUD |
|
PowerGenius PGXL
1.8–54 MHz 1500W
PowerGenius XL is a 100% ICAS duty cycle, legal limit (1500W ICAS) 1.8-54 MHz, the only fully SO2R capable RF amplifier.
Designed with a pair of the latest NXP MRF1K50H LDMOS transistors that are each capable of 1.5 kW and run up to 2000W easily, providing plenty of headroom for lowest IMD and spurious output.
The first ever feature built in any amplifier so far is MEffA™ system (Maximum Efficiency Algorithm) control efficiency as function of output power. MEffA is a unique technique that changes the DC voltage level to the PA in a manner to match the envelope of the exciting RF in order to yield the most efficiency. The PA efficiency is not constant at a fixed DC level but varies with the envelope of the signal.
PG XL is the cleanest amplifer with exceptional spurious performance achieved by its diplexed filters. Thanks to smart cooling, MEffA, real time drive settings and fan speed control PG XL has best thermal performance and lowest fan noise possible.
PG XL is the only fully SO2R capable amplifier. It has 70dB nominal isolation between exciter inputs.
A single FLEX-6700 and Power Genius XL comprises a complete SO2R station at half the cost of competing solutions.
As expected PG XL is well protected from high SWR, with ultra fast SWR circuit, inhibiting RF module in less then 1uS.
The Power Genius XL is network capable with an Ethernet connection built-in. This means it completely and seamlessly integrates with any FLEX-6000 Series radio, allowing the amp to be controlled from SmartSDR, whether on SmartSDR for Windows, iOS, or your Maestro. |
|
| Tuner Genius for PGXL SO2R
SO2R Antenna Tuner to match PGXL Amplifier
|
|
| Tuner Genius for PGXL 3x1
Antenna Tuner to match PGXL Amplifier, 3 antenna outputs version
|
|
| Model | Description | Price AUD |
 |
ICOM IC-7851 The Flagship ICOM HF / 6m Transceiver Competitive advantage: reciprocal mixing dynamic range RMDR: 110dB raising the bar! 1.2kHz optimum roofing filter. Crystal clear LO (Local Oscillator) design.Improved phase noise characteristics.Twice the speed, sensitivity, resolution and more control- improved spectrum scope. High resolution spectrum waterfall display. +40dBm IP3 (3rd Order Intercept Point). 200W Output Power at Full Duty Cycle PA unit and heat sink. The push-pull power amplifiers using power MOS-FETs work on 48V DC. They provide a powerful 200W output power at full duty cycle and low transmit intermodulation. An effective cooling system maintains internal temperatures within a safe range and prevents thermal runaway. |
|
 |
ICOM IC-7760
HF / 6m Transceiver 200W
Outstanding Performance for Contesting and DX Hunting.A New Innovative Shack Style In today’s connected world, the IC-7760 introduces a new connected system consisting of a control head and an RF deck, connected over the Internet or a home LAN network (Wired or Wi-Fi®). This concept increases the flexibility of your station installation, making more space available on the desktop by placing the RF deck in a location closer to the antenna feed point. In addition to the direct connect feature, you can place the RF deck at your remote HF station and operate a full-scale remote with the control head at your home. For example, it enables you to operate a club station with the control head at your home. |
|
 |
ICOM IC-7610
HF / 6m Transceiver
Independent Dual Receiver Whether listening to both sides of a rare DX station running split, or looking for a multiplier on a different band or mode, the dual receivers in the IC-7610 have you covered. Two separate DIGI-SEL preselectors, two separate Band Pass Filter networks, feed two separate A/D converters into the FPGA. |
|
 |
ICOM IC-9700
2m / 70cm / 23cm Transceiver
High-Speed Real-Time Spectrum Scope, Waterfall Display, and Built-in 1200 MHz! This Supreme VHF/UHF Transceiver Provides a Brand New Experience! Direct Sampling Brought to the VHF/UHF World Built with the VHF/UHF weak signal operator in mind, the IC-9700 is an RF direct sampling receiver for 2m and 70cm. The IF receiver consists of a single, down conversion for 23cm that is between 311 – 371MHz. This design provides a quiet receiver due to Icom’s DSP technology. The robust PA provides 100W on 2m, 75W on 70cm, and 10W on 23cm. |
|
 |
ICOM IC-7300
HF / 6m Transceiver
New technology is changing the way receivers are being designed, and the IC-7300 is an industry first as an RF Direct Sampling System is being used in an entry-level HF radio. The ability to digitize RF before various receiver stages reduces the inherent noise that is generated in the different IF stages of a radio. We feel the performance of the ‘7300 will far exceed your expectations for a radio considered entry-level. Australian RRP $1,875. DXing price: $1,675. |
|
|
YES we ship worldwide! Let us know what you are interested in via email to mail@DXing.com.au and we will provide the best shipping option to your country. For the list of radios and amplifiers intended for export, follow the link to
DXing export stock list with prices in USD
|
|
DXing ©2023-2025. by mail@DXing.com.au |
