AUSTRALIAN HAM RADIO STORE
Hot
- Description
- SPECIFICATION
- OPTIONS
Description
This interface will convert frequency data given from RS232 CAT or CI-V to BCD output. BCD output can be used to control Antenna Genius or any other BCD controlled device.
On the rear panel you will find:
- DC connector – to connect external power supply, 15V DC/500mA
- RS232 input connector – DB9 male, used to connect your transceivers CAT output
- RS232 output connector – DB9 female, used to conect any other device which need RS232 CAT data, like USB interface, amplifier etc
- CI-V input connector – 3.5mm stereo, used to connect your ICOM transceivers CI-V output
- CI-V output connector – 3.5mm stereo, used to conect any other device which need CI-V data, like USB interface, amplifier etc
- Icom voltage control band input – 2.5mm mono, used to connect your older ICOM transceivers band data output
- BCD output connector – DB9 female, used to control periphels with BCD data, like Antena Genius, amplifiers etc
On the front panel you will find:
- Four BDC LEDs, showing current BCD output status
- USB connector – for communication with PC
- CAT LED – status of CAT
- BV LED – Showing status of BV Band data
- ON LED – showing power supply status
Weight: 0.2 kg
Size: 13 x 13.5 x 2 cm
There are several individual purchase options available:
- ACOM 06AT | Automatic Antenna Tuner and Switch;
- ACOM 04AT | Remote Automatic Antenna Tuner and Switch;
- ACOM eBox | | Ethernet Remote Control Device.
