AUSTRALIAN HAM RADIO STORE
-9%
- Description
Description
Descriptions
・10 GHz band operation using 2400 MHz IF band
・High frequency stability using 10 MHz reference signal
・2400 MHz band bypass operation
Specifications
GENERAL
| Frequency range | TX/RX (Guaranteed range) | 10.000 ~ 10.500 GHz | |
|---|---|---|---|
| Operating temperature range | -10 ~ 55 ℃, 14 ˚F ~ 131 ˚F | ||
| Antenna impedance | 50 Ω | ||
| Frequency stability | Less than ±65 ppb (with IC-905) | ||
| Power supply requirement | 12 V DC ±15% (Power supplied from the IC-905 RF unit) |
||
| Power consumption | TX (at 10 GHz) | Less than 15 W | |
| RX (at 10 GHz) | Less than 4.8 W | ||
| IF through operation | Less than 4.8 W | ||
| Dimensions (W x H x D) | (Projections are not included.) | 181 x 115 x 64 mm, 7.1 x 4.5 x 2.5 inch | |
| Weight (Approximate) | 1338 g, 2.9 lb. (Accessories and brackets are not included) | ||
| 2487 g, 5.5 lb. (Accessories and brackets are included) | |||
TRANSMITTER
| Transmission Loss*2 | Less than 2.0 dB (at 2400 MHz bypass operation) | |
|---|---|---|
| IF input frequency*3 | 2.4 ~2.45 GHz | |
| Conversion gain*3 | 7 dB (typical) | |
| IF input power*3 | Bypass | 2.0 W typical (The RF output power is set to 100%) |
| Transmit | 0.1 W (typical) | |
| 10 GHz output power*3 | SSB, CW, FM, RTTY, DV, DD, ATV | 0.5 W (typical) |
| AM | 0.125 W (typical) | |
| Spurious emissions*2 | Less than 100 μW | |
RECEIVER
| IF output frequency *3 | 2.4 ~2.45 GHz | |
|---|---|---|
| Conversion gain*3 | 6 dB typical | |
| Sensitivity*3*4 | SSB, CW (at 10 dB S/N) | Less than -17 dBμV |
| AM (at 10 dB S/N) | Less than 1 dBμV | |
| FM (at 12 dB SINAD) | Less than -13 dBμV | |
*2 When connected to the IC-905
*3 When connected to the IC-905 (10 GHz band operation)
*4 When the cable loss between the IC-905 and CX-10G is less than 1 dB.
Applicable IP Rating
| Ingress Protection Standard | |
|---|---|
| CX-10G | IP55 (Dust-protection and water jet resistance) |
