ICOM AT141_64
ICOM MBA-1

ICOM RS-BA1

$150

IP REMOTE CONTROL SOFTWARE

Version2

Availability: 1 in stock SKU: RS-BA1 Categories: , Tags: , , ,
Add to wishlist

ICOM RS-BA1

$150

In stock

Description

Descriptions

Dualwatch, Dual Spectrum Scope Control

The dualwatch operation and dual spectrum scopes with the waterfall functions* can be used on your remote PC. MAIN and SUB spectrum scopes can be observed on the RS-BA1 at the same time. Of course, the RS-BA1 can be used with Icom single receiver transceivers.

* The dualwatch and dual spectrum scope functions are only for the IC-7851, IC-7850 and IC-7610. The spectrum scope functions (single receive) are usable with the IC-7300, IC-9700, IC-705 and IC-905.

Most Functions Can Be Controlled

Most functions and modes of your transceiver, including interference rejection functions and IF filter settings, can be controlled using the CI-V commands. The following functions are added to the RS-BA1 Version 2.

  • Panel size can be enlarged (Normal or large size selectable)
  • Indicator click operation to change the settings
  • RIT and ⊿TX functions
  • [MUTE] button
  • SUB dial

Low Latency, High Quality Audio Over an IP Network

The RS-BA1 offers real-time operation with low latency, high quality audio. You can use the transceiver installed in another room using your home network, or even from a remote location over the Internet*.

* A static public IP address or Dynamic DNS is required for the base station (Server) PC, when you configure the remote control system through the Internet.

Functions Compatibility Chart

IC-7851
IC-7850		 IC-7800
IC-7700		 IC-7610 IC-7600 IC-7410
IC-9100		 IC-7300 IC-7200 IC-7100 IC-9700 IC-705
IC-905
Dualwatch Function ✓ – ✓ – – – – – – –
Server Function ✓ ✓ ✓ – – – – – ✓ ✓
Remote Power ON/OFF ✓ ✓ ✓ ✓ – ✓ – ✓ ✓ ✓
Spectrum Waterfall Scope ✓ – ✓ – – ✓ – – ✓ ✓
Scroll Mode – – – – – ✓ – – ✓ ✓
APF AF Level Adjustment ✓ ✓ ✓ ✓ – – – – – –
CW Keyer ✓ ✓ ✓ ✓ ✓ ✓ – ✓ ✓ ✓
Voice Recording/Playback ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
USB Dial with
Optional RC-28		 ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓

✓ : Function available. – : Function Not available.
*Depending on your transceiver, some functions or modes cannot be used, or you need to update
the transceiver’s firmware.
Please use the latest firmware version of the transceiver.

Specifications

PC (Base station or Remote station)
* When only one transceiver and one PC are connected to the Server PC.

Operating System Windows 11 (64 bit),
Windows 10 (32/64 bit)
CPU 1.8 GHz Processor or better
(Multi-core Processor required for Windows 11)
Memory Windows 11 (64 bit): 4 GB or more
Windows 10 (32 bit): 2 GB or more
Windows 10 (64 bit): 4 GB or more
Hard disk space 150 MB or more of available disk space
*The Voice Memory or Recording function will require more space.
Network data speed
(When the default audio quality is used)		 To use the Dualwatch function
(IC-7851/7850/7610)		 For the Base station:
Upload: 1.2 Mbps Download: 350 kbps, or fasterFor the Remote station :
Upload: 350 kbps Download: 1.2 Mbps, or faster
Other models
(Other than the
IC-7851/7850/7610)		 For the Base station:
Upload: 500 kbps Download: 350 kbps, or fasterFor the Remote station :
Upload: 350 kbps Download: 500 kbps, or faster
Display Resolution 1024 × 768 pixels (enlargeable)
Other Speaker and microphone or headset (purchase separately)
On-board sound chipset recommended

This is the minimum system requirement to use the RS-BA1 Version 2.
Because the system requirements may differ, depending on your PC environment (permanently running software such as antivirus software, peripheral devices, network condition, settings of OS and other software), the operation is not guaranteed.

All stated specifications are subject to change without notice or obligation.

Supplied Accessories

  • USB flash drive (#22) or CD (#12) (including RS-BA1 installer, instruction manual, USB driver and USB driver installation guide)
  • USB cable (A-B type)
  • Installation guides

Related Products