OM SW 1/10+ BCD Controlled – Shortwave plus 50 MHz Antenna switch

Description

The antenna switch OM SW 1/10 is designed for remote antenna switching. It allows
to connect one of ten antennas to common antenna output.
Antenna switch OM SW 10/1 was designed to cooperate with OM Power automatic
power amplifiers OM2200A, OM2500A and OM4000A and the OM SW 10/1+
which is equipped with BCD decoder cooperate with OM2000A+.
Of course, the antenna switch OM SW 10/1 and OM SW 10/1+ can be used
independently from OM Power amplifiers with various controllers.

• Selecting one of 10 antennas
• Characteristic impedance is 50 ohm , frequency range up to 60 MHz
• Power rating – up to 5kw continuous carrier
• Teflon (PTFE) insulated SO239 connector
• Excellent VSWR and crosstalk isolation
• Only 20 ms switching time between ports
• Compatible without any additional devices directly with OM Power automatic amplifiers
• Compatible with any band decoder with 12V source voltage
• Compatible with Yaesu BCD code ( 5V logic)
• Unused antenna can be grounded as needed , opened or loaded with characteristic impedance
• Dust and rain protected 3
• Easily mounted on the wall or tower
• The antenna switch is intended to be used either inside or outside

There are several individual purchase options available:

• ACOM 06AT | Automatic Antenna Tuner and Switch;
• ACOM 04AT | Remote Automatic Antenna Tuner and Switch;
• ACOM eBox | | Ethernet Remote Control Device.