Hot

Power Amplifier OM2000A+

$9,694

Availability: 2 in stock SKU: OM2000A+ Category: Tags: , , ,

Power Amplifier OM2000A+

$9,694

In stock

Description

The automatic linear amplifier OM2000A+ is designed for all short wave amateur bands from 1.8 to 29 MHz (including WARC – bands) + 50 MHz and all modes. It is equipped with a ceramic tetrode FU-728F.

Specification of OM2000A+:

Frequency coverage: Amateur bands (1.8 – 29.7) MHz including WARC + 50 MHz
Power output: 2000+ W in SSB/CW on HF bands, 1500 W in RTTY
1500 W CW/SSB on 50 MHz
Drive power: 40 to 60 W for full output power
Input impedance: 50 ohm VSWR < 1.5 : 1
Output amplification: 17 dB
Output impedance: 50 ohm unbalanced
Maximum output SWR: 3:1
SWR protection: Automatic switching to STBY when reflected power is 350 W or higher
Intermodulation distortion: better then -32 dBc
Suppression of harmonics: min. -50 dBc (better than -70 dBc on 50 MHz)
Response speed of AUTO tune: less than 0.5 s within same BAND, less than 3 s if out of BAND
Supported TRXs-CAT: ICOM, ELECRAFT, KENWOOD, TEN-TEC ORION, YAESU,
Icom transceive protocol using by microHAM devices – CI-V OUPUT,
Flex Radios and Anan ( Apache Labs )
Tube: FU-728F ceramic tetrode
Cooling: Centrifugal blower + axial blower
Power supply: Switchable 220/230/240 V – 50/60 Hz or other primary voltages
(for example 200 V 50/60 Hz for Japan)
Transformers: 1x toroidal transformer 3 kVA
Protection circuits: – VSWR too high
  – Anode current too high
  – Anode voltage error
  – Screen current too high
  – Screen voltage error
  – Grid current too high
  – Grid voltage error
  – Heating voltage error
  – Mistuning of power amplifier
  – Temperature to high
  – Soft start for fuse protection
  – “switch –on blocking“ at opened amplifier
Indications: 4.3″ color touch screen display
Features: – Automatic external Antenna switching
– Automatic switching between bands
– Automatic tuning within the band according to segments
– Automatic switching of Band Pass Filter
– Memory for faults and warning, easy maintenance
– Automatic set-up anode current (BIAS) – no need to manual adjust after changing the tube
– Three programmable working modes of centrifugal blower ( turbine ) + axial blower
– T/R System: QSK operation with built-in vacuum RF antenna relay
– Easy transport due to detachable HV transformer
– Remote control – connector for LAN connection
– The Power Amplifier is HF sensitive (automatic frequency reading even if no CAT)
– The smallest and lightest 2000 W automatic PA on the market
Mechanical parameters: 390 mm x 195 mm x 370 mm (width x height x depth)
Weight: 24 kg

There are several individual purchase options available:

  • ACOM 06AT | Automatic Antenna Tuner and Switch;
  • ACOM 04AT | Remote Automatic Antenna Tuner and Switch;
  • ACOM eBox | | Ethernet Remote Control Device.

Related Products