OM SW 2/10+ BCD Controlled – Shortwave plus 50 MHz Antenna switch

Description

The antenna switch OM SW 2/10 is designed for remote antenna switching. It
allows to connect one of maximally ten antennas to one of two common antenna
ports TX-A and TX-B (outputs).
Antenna switch OM SW 2/10 was designed to cooperate with OM Power
automatic power amplifiers OM2200A, OM2500A, OM4000A and the
OM SW 2/10+, which is equipped with BCD decoder cooperating with
OM2000A+ and OM4001A. It is possible to produce antenna switch with
combination of OM SW2/10 and OM SW 2/10+ (one side controlled with BCD
code)
Of course, the antenna switch OM SW 2/10 and OM SW 2/10+ can be used
independently from OM Power amplifiers, with various controllers.

Selecting one of maximum10 antennas
 Characteristic impedance is 50 ohm , frequency range up to 60 MHz
 Power rating – up to 5kw continuous carrier
 Teflon (PTFE) insulated SO239 connector
 Excellent VSWR and crosstalk isolation
 Only 20 ms switching time between ports
 Compatible with OM Power automatic amplifiers, without need of any additional devices.
 Compatible with any band decoder with 12V source voltage 3
 Compatible with Yaesu BCD code ( 5V logic)
 Unused antenna can be grounded as needed , opened, or loaded with characteristic impedance
 Dust and rain protected
 Easily mounted on the wall or tower
 The antenna switch is intended to be used either inside or outside

There are several individual purchase options available:

• ACOM 06AT | Automatic Antenna Tuner and Switch;
• ACOM 04AT | Remote Automatic Antenna Tuner and Switch;
• ACOM eBox | | Ethernet Remote Control Device.